|
|
# of 0 |  Prev -
Next 
 JBL LSR 4300 4326P 6" Reference Monitor
|
JBL LSR4300 4326P 6.25" Two Way
Introducing the new JBL LSR4300 Studio Monitors featuring RMC™ Room Mode Correction, JBL's exclusive technology that automatically analyzes and corrects the response of each speaker in the room for absolute accuracy at the mix position. The first studio monitors with powerful network intelligence built into each speaker specifically designed to deliver an accurate mix in any room, the LSR4300's are the ultimate monitor for modern production studios.
The LSR4300 models feature stunning JBL sound, provide accurate mixes in any workspace, and are priced well within the reach of any project studio. The first self aware monitoring system, they're the only choice for music, post, broadcast, Surround 5.1, and beyond.
The 4326P features RMC™ Room Mode Correction, JBL's exclusive technology that automatically analyzes and corrects the response of each speaker in the room for absolute accuracy at the mix position.
Key Features :
- Advanced LSR Linear Spatial
- Reference Design provides neutral off-axis response for greater clarity at the mix position
- Automated RMC™ Room Mode
- Correction system with calibration microphone measures and automatically compensates for low frequency standing waves and boundary conditions.
- Harman HiQnet™ Network Protocol enables system-wide control of level, EQ, input selection, solo and more
- Wireless remote control and LSR4300 Control Center Software enable control from the listening position.
- AES/EBU, S/PDIF digital inputs
- Balanced analog input with selectable +4dBu / -10 dBV sensitivity.
- Bi-amplified design eliminates the need for external amplification.
- Front panel output meter with variable brightness displays signal level.
- Custom designed, self-shielded transducers with neodymium motor structures for exceptional transient response and superb powerhandling.
- Integrated mounting points allow wall mounting for greater placement options
- Built-in handles facilitate optimum positioning.
- Low and High Frequency
- Equalization with factory presets allows tailoring of response to preference, or acoustic conditionsin the room
436H Low Frequency Transducer
The 6.25" woofer utilizes a powerful, shielded neodymium magnet of light
weight which can be used in close proximity to CRT-type monitors with no
interference. The transducer utilizes a copper-clad polepiece that improves high
frequency output by reducing voice coil inductance. A copper ribbon voice coil
ensures high sensitivity, and a flux shorting ring stabilizes the magnetic field in the gap, reducing distortion. Heat sinking has been placed close to the magnetic gap in order to draw out heat as efficiently as possible. The cone is polymer coated for uniformity of response over the woofer's passband.
431G High Frequency Transducer
The high frequency transducer has a treated silk diaphragm that produces
uniform and smooth sound. Its flat ribbon aluminum voice coil ensures low
moving mass and enables the transducer to achieve response out to 22 kHz. A
light weight neodymium magnet structure with integral heat sinking, along with Ferrofluid in the magnetic gap, enable the transducer to produce high peak output levels with minimal power compression. The magnet structure is integrally shielded, enabling the system to be used in proximity to CRT-type monitors with no interference.
Bi-amplified Power System
The LSR4326P incorporates two high power amplifiers that provide 150 Watts
of power to the low frequency transducer and 70 Watts of power to the high
frequency transducer. A precision digital dividing network having high-order
Linkwitz-Riley slope characteristics for smooth transition between transducers,
results in exceptional imaging and lack of time smear. The circuitry also yields a tonal-artifact-free noise floor.
Network and Digital Features
The LSR4300 Series utilizes the Harman HiQnet™ network protocol that
allows centralized control of a multi-channel system from a from any speaker’s
front panel, wireless remote control, or computer via a standard USB connection and LSR4300 Control Center Software. The network is configured using supplied CAT5 cable and by setting a DIP switch on each speaker. Harman HiQnet also enables synchronized RMC calibration of all speakers on the network
Specifications:
|
Frequency Response
|
|
+/-1.5 dB: 55 Hz – 20 kHz
-3 dB: 47 Hz – 22 kHz
10 dB: 39 Hz – 32 kHz
|
|
|
SPL / 1m
(Continuous/Peak)
|
|
106 dB / 112 dB
|
|
|
Transducers
|
|
6.25in 436H / 1in 431 G;
Self- Shielded, Neodymium
Motor Structures
|
|
|
Sensitivity +4 dBu, -10 dBV
|
|
94 dB / 1m
|
|
|
Amplification
|
|
150 w/ 70 w
|
|
|
Digital Processing
|
|
24 Bit, 96 kHz
|
|
|
Analog Inputs
|
|
XLR, 1/4” Balanced, +4 dBu, -10 dBV
|
|
|
Digital Inputs
|
|
AES/EBU XLR, S/PDIF RCA
|
|
|
Data Connections
|
|
Harman HiQnet™ Network, USB, RMC Mic
|
|
|
|
|
Dimensions (H x W x D):
|
|
387 mm x 236 mm x 262 mm
15.25 in x 9.3 in x 10.3 in
|
|
|
0 item 
